Sperling Home PageResourcesAbout Sperling EnterprisesContact Sperling EnterprisesLinks to Retailers

Air FreshenersCar Floor MatsHeadrest CoversKenco Premium Cleaning ProductsPicnic RugsCar Seat CoversSteering Wheel CoversSteering Wheel LocksCar Sun Shades

Airbag Compatible

Tailormade CtalogueKenco Catalogue

 

The airbag compatible seat covers are designed to allow the side seams to split upon deployment of an airbag.
They are constructed using a computer controlled stitching process and specialised thread, which has been
tested by APV-T and found to not obstruct the deployment and position of the airbag.

For full details of the test report please click on the link below

Airbag Compatibility Test Report

Our Airbag Compatible car seat covers are available in the Gold and Silver Series range of seat covers. They
are also suitable for seats without airbags.

AIRBAG DISCLAIMER


This product is suitable for cars with standard side airbags. Before fitting please read below.

1. Correct initial fitting and securing of this seat cover on your vehicle is essential to allow deployment of seat
airbag. Incorrect fitting can prevent the seat airbag from inflating correctly in the event of a collision.

2. The driver and passenger seat cover must be fitted to the correct side. There is an identifying tag on each
seat cover. You must fit ‘drivers’ on drivers side and passenger’ on passenger side.

3. Seat covers that have slipped must be repositioned. If this is no longer possible because of advanced wear
the seat cover must be replaced.

4. Do not tamper with the opening side seam of the seat cover.

5. These seat covers are designed to allow the side seams to split open upon deployment of an airbag because
they are constructed using a computer controlled stitching process and specialised thread.

6. If the side seam splits for any reason it cannot be repaired. Any attempt to resew the seam may interfere with
the standard integrated side airbag deployment.

7. Discard the seat covers after side airbag activation.